Maintenance
What should I do when my concrete starts cracking?
Small concrete cracks can be easy to overlook, but changes around them may show that the problem is getting worse. Learn what to look for and why early repair matters.
· 2 min read · Burlington Concrete and Asphalt
The short answer
The short answer
Have a concrete contractor look at new or changing cracks before they spread, widen, or appear with settling, sagging, or heaving. Putting off the assessment can allow a repairable problem to become a larger concrete repair or replacement job.
How to spot a concrete problem early
Look at more than the crack itself. A crack that is widening, extending across more of the slab, or appearing in several places deserves attention. Changes in the surface around the crack can also help show whether the concrete is moving.
Watch for uneven sections, a slab that no longer sits level, edges that have lifted, or areas that sag. These conditions can affect concrete construction, curbing, foundations, parking areas, and other paved surfaces.
Why small cracks should not be ignored
A crack does not always mean the entire slab needs to be removed. The right repair depends on the location, size, surrounding condition, and whether the concrete is settling, heaving, or otherwise moving.
Waiting makes it harder to separate the original crack from later damage. Water, traffic, repeated loading, or continued movement can leave more of the surface needing repair, and the work may shift from crack repair to larger concrete repair or demolition.
What a concrete contractor may need to check
A contractor can inspect the cracked area and the concrete around it, then determine whether the work calls for crack repair, repair of a settled or heaved section, or removal and replacement. The condition of nearby curbing, parking areas, and access points may also affect the work.
If damaged concrete must be removed, the project may include concrete demolition and haul-off services before new concrete construction. Where the problem involves the ground below the surface, site preparation, grading, trenching, or backhoe services may also be part of the repair.
Can every concrete crack be repaired?
No single repair fits every crack. A concrete contractor needs to assess the crack and the surrounding slab to determine whether crack repair is suitable or whether the area also has settling, sagging, heaving, or other damage.
Should I repair a crack if the concrete is still usable?
It is worth having the crack checked while the surrounding concrete is still usable. An early assessment may identify a limited repair before more of the slab or nearby surface is affected.
What happens if the concrete cannot be repaired?
The damaged section may need concrete demolition, haul-off, site preparation, and new concrete construction. The required work depends on the condition of the slab and the ground supporting it.
Keep reading
More from the blog.
How do I plan concrete work before booking a date?
Before scheduling concrete work, decide what is changing, have the area measured, and make sure the full scope is written down. This helps keep the planned work and the agreed work aligned.
Read the postWhy do concrete or asphalt quotes vary so much?
Concrete and asphalt pricing depends on more than the visible surface. Learn why site conditions, preparation, demolition, materials, and included services can make two quotes look very different.
Read the postAll concrete services
What we do, what it costs, and how each visit actually goes.
Browse servicesLet’s Talk About Your Concrete Project
Whether you need a new concrete installation, ICF construction, repairs, or other concrete work, tell us what you’re planning or what you’re seeing. Share a few details about your project so Burlington Concrete & Asphalt can review the work and discuss the next steps with you.