Concrete repair

Settling concrete

Settling can leave concrete and paved surfaces uneven, creating problems for vehicles, pedestrians, and drainage. Burlington Concrete & Asphalt can assess the affected area and recommend the appropriate work in Jacksonville.

At the removal stage of a settling repair, a worker uses a rotary hammer to break out a damaged section beside a dropped concrete walkway

Overview

Concrete can settle when the support beneath it changes or no longer holds the slab at its original height. The result may be a walkway that drops at one end, a driveway section that no longer meets the next section, or a low area across a parking surface.

The repair starts with looking at the affected slab and the surfaces around it. We identify how the concrete has moved, determine what needs to be removed or repaired, and prepare the area before restoring the damaged section.

Symptoms

Signs of settling

A slab has dropped at one edge

A visible step between adjoining sections can create a trip point and put stress on the edge of the concrete. The difference in height also shows where the surface has moved.

Water collects in one area

A low spot can hold water after rain instead of allowing it to drain across the intended surface. Persistent pooling can also make existing cracks and surface damage more noticeable.

A walkway feels uneven underfoot

Changes in height, tilted sections, and uneven joints make a walkway harder to cross safely. These areas are worth addressing before the movement or adjacent damage becomes more extensive.

A driveway or parking area no longer lines up

When one section settles, it may sit below the surrounding concrete or asphalt. The uneven transition can affect vehicles, equipment, and drainage across the area.

Our process

How the repair goes

  1. Assess the movement

    We examine the settled section, its edges, nearby joints, and the surrounding grade. The condition of the concrete helps determine whether the repair involves the existing slab, removal, or a combination of work.

  2. Plan the repair area

    The affected section is marked so the work addresses the actual low or uneven area rather than only the most visible point. Nearby concrete and access are considered before work begins.

  3. Remove damaged concrete where needed

    Concrete that cannot remain part of the repair is broken out and cleared from the work area. Removal exposes the area that must be prepared before new concrete work can proceed.

  4. Prepare and restore the surface

    The repair area is prepared, then the concrete work is completed to restore the affected section and its transition to the surrounding surface. The finished area is checked for alignment and surface condition.

Scope

What the job includes

Settling repairs are quoted after reviewing the size, condition, access, and amount of removal or restoration required.

Request service
  • Assessment of settled concrete
  • Review of surrounding grades and joints
  • Marking of the repair area
  • Removal of damaged concrete where needed
  • Preparation of the work area
  • Concrete repair and surface restoration

Settling questions

Answers before you book.

More questions on our full FAQ page.

What causes concrete to settle?

Settling occurs when the material or support beneath a slab changes, allowing the concrete to drop or tilt. The visible result can be a low area, uneven joint, or separation from nearby surfaces.

Can a settled slab be repaired without replacing it?

That depends on the condition of the slab and the extent of the movement. The concrete and surrounding area need to be assessed first to determine whether repair or removal is appropriate.

Is settled concrete the same as cracked concrete?

No. Settling describes a change in height or position, while cracking describes a break in the concrete. A settled slab may also have cracks, but the repair must address the movement as well as the visible damage.

How do I know if a settled walkway is a safety issue?

A noticeable height change, uneven joint, tilted section, or low spot can create a trip point or affect drainage. Have the area assessed when the surface no longer feels or looks level with the sections around it.

Reviews

Homeowners who count on us.

5 average, based on 23 Google reviews

★★★★★

Replacing a 38 yr old driveway is no fun. But when the patchs and cracks tell you it is time; I reccomend Burlington Concrete. I have friends who went with a low ball quote and the old saying "The bitterness of poor…

Cortney Daugherty Jacksonville · Google review
★★★★★

Easy to work with! Highly recommend!

Robert Kiser Jacksonville · Google review
★★★★★

We had an old driveway removed and a new circle drive installed with two walkways leading to our front porch and a side parking wing. The team at Burlington did a fantastic job and got it done in the timeline they said…

AmyDominic Ross Jacksonville · Google review

Let’s Talk About Your Concrete Project

Whether you need a new concrete installation, ICF construction, repairs, or other concrete work, tell us what you’re planning or what you’re seeing. Share a few details about your project so Burlington Concrete & Asphalt can review the work and discuss the next steps with you.

Ready To Plan Your Concrete Work?

5 23 Google reviews
  • Licensed & Insured
  • Satisfaction Guaranteed
Call us now Book online